|
|
|
|
|
What do I do if there is no display indication and the cryostat doesn’t work
|
 |
| FAQ Report |
|
- Check that the mains lead is connected properly to the outlet and the instrument.
- Check to see if the over-current (GFCI) or circuit breaker has been activated. Reset and switch the cryostat on again with the mains power switch after approximately 5 minutes.
- Check the mains fuse.
- If all of the above are OK – call Technical Service.
|
|
|
/48A45BA23442B309C125742C004CD19C/$FILE/CM1950_Display_1.jpg','PicturePopUp','scrollbars=no,status=no,width=650,height=500' ); void(0))
