| FAQ: Leica CV5030 Coverslipper | ||||
 |
|
|
||
| Load Container | ||||
|
||||
| 01. | The upper portion of the sections on the slides is dried out - what can I do? | |||
|
||||
| A:The slides are not fully immersed in reagent inside the load container If you wish to do wet coverslipping, always ensure that the load container (“bath”) is completely filled with reagent. Check the fluid level in the load c read more ... |
||||
|
||||
| 02. | The load container is not moving – what is the problem? | |||
|
||||
| A: Most likely, the problem is caused by some sort of mechanical obstruction The transport mechanism consists of a chain module located on the bottom of the load area. Check whether the chains are running when the load drawer i read more ... |
||||
|
||||
| 03. | Can the Autostainer and Multistainer Workstations also be operated with the deep load container in the Coverslipper? | |||
|
||||
| Yes, since August 2006, both workstations can be operated with the deep load container. Thus, the covering on the slides will be improved and problems during coverslipping, like the forming of bubbles, will be eliminated. In order to ens read more ... |
||||
|
||||
|
||||
|
